How to Make a Template for Cabinet Pulls

What You’ll Need

Making a template for cabinet pulls requires some basic supplies. You’ll need a drill and drill bits, a jigsaw, a router, a router template, a router guide, and a saw. You’ll also need a measuring tape, clamps, and a straightedge.

Step 1: Measure the Cabinet Pulls

Before you start making the template, you need to measure the cabinet pulls. You’ll need to measure the distance between the center of the two screws that hold the pull in place. This measurement will determine the size of the template.

Step 2: Drill the Holes

Once you have the measurements, you can start drilling the holes. Use a drill bit that is slightly smaller than the screws that hold the pull in place. Drill two holes for each pull, making sure that the holes are equidistant from each other.

Step 3: Use the Jigsaw to Cut the Template

Now you can use the jigsaw to cut the template. Make sure that the template is slightly larger than the measurements you took. This will ensure that the template fits perfectly over the cabinet pulls.

Step 4: Use the Router and Router Template

Once the template is cut, you can use the router and router template to create the holes for the screws. Use a router guide to ensure that the holes are even and the same size. Once the holes are cut, you can use the saw to cut the template into the shape of the cabinet pulls.

Step 5: Install the Cabinet Pulls

Once the template is complete, you can use clamps to secure it in place. Then, use the screws to install the cabinet pulls. Make sure that they are installed securely and that they are level with the cabinet.